How Long Does A Well Test Take?

What is done during a well inspection?

During an inspection, the inspector will test the water system and check it for volume and pressure.

They will look at the well to make sure it is properly constructed and compliant and they will run water tests for things like bacteria, nitrate, and arsenic, depending on county requirements..

Is a well inspection necessary?

According to the EPA, over 15 million homes rely on private wells for drinking water. … And well inspections are vital for ensuring water purity. Well inspections are a thorough evaluation of the entire well system. It starts with the operation of the submersible pump and water recharging into the well.

How much does it cost to drill an existing well deeper?

Drilling a well costs $5,500 for an average depth of 150 feet. Most projects range between $1,500 and $12,000. Expect to pay between $15 and $30 per foot of depth, or up to $50 for difficult terrain.

How far does a well need to be from a house?

Location – (Figure 3) A well should be located at least 15 m (50 ft.) from any source of contamination if the casing is watertight to a depth of 6 m (20 ft.); otherwise, the separation distance should be at least 30 m (100 ft.).

Can you drill an existing well deeper?

Well Deepening: Reentering an existing well and drilling to a deeper reservoir. Well deepening is re-drilling into an already existing well in order to find a deeper more productive reservoir. Sometimes a previously unproductive well can be deepened in order to reach a location with higher flow and temperature.

How often should you test your well water?

When should I have my well tested? You should have your well tested once a year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well.

How often should you chlorinate your well?

Have a professional check your well water every three to five years to ensure it’s free of dangerous microbes. If their tests do reveal the presence of microbes, order a complete well chlorination. Chlorine treatment will remove all toxic bacteria and algae, with only minimal disruption to your water supply.

How deep should a well be for drinking water?

between 10 and 30 feetDug wells are the shallowest type of well, typically between 10 and 30 feet deep; therefore, the most likely to become contaminated from nearby agricultural, industrial, or urban sites. Driven wells are hammered into the ground and draw water from the saturated zone.

What does a well test consist of?

Standard water tests will typically check for such things as PH, hardness, alkalinity, and turbidity. Standard mineral testing will often include things like iron, calcium, manganese, copper, fluoride, Chloride and others. Coliform bacteria is also typically checked in most well tests, especially in rural areas.

Should you get a well inspection?

Water wells need regular inspection to ensure proper operation, usefulness, and safety. These reviews can identify significant issues concerning poor water quality and health risks. As such, your well should be evaluated at least annually by a licensed or certified water well systems professional.

Why does my well water smell like poop?

Bacteria growing in the drain Bacteria growing in the drain is the most common reason for this smell. Over time, organic matter, like food waste, will accumulate on the walls of the drain and act as a nutrient for bacteria to grow. The bacteria can produce a gas (sulfur) which smells like rotten eggs or sewage.

What happens if my well fails inspection?

In addition to sterilizing the well, an owner/seller or the new owner of a well that has failed a water test more than once in succession should: … install water treatment/sterilization equipment such as a chlorinator/charcoal filter system or an ultra-violet light system. These systems work but require maintenance.

How much does it cost to have your well water tested?

Costs can vary depending on the number and type of tests you request. Typical tests range from $25-$400.

How often should a well be cleaned?

every ten yearsGet the well professionally inspected by a water well contractor every ten years.

Do deeper wells mean better water?

Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.

What depth is considered a deep well?

If the water table is at 50 feet, a deep well might be 100 feet deep. For many wells drilled into the sand and gravel aquifer, the amount of casing—the pipe that lines the well hole—is nearly the same as the depth of the well itself.

How long does a well inspection take?

two to three hoursHow long does a well inspection take? A basic well inspection takes two to three hours to complete. If you get a water test, it may take up to a few weeks to get the results on your well water back from the lab.